|
MSP430
Development
Systems:
Bundled
with Software
Hardware only
JT-EASY™:
JT-E100A
JT-E100K
Kit
JT-E100B PCB only
M-Series
Modules:
M-28P-1232
M-28O-1232
M-28K Kit
M-28B PCB only
M-20P-1121A
M-20O-1121A
M-20K Kit
M-20B PCB only
Compilers and
Debuggers:
ImageCraft
ICC430
Quadravox AQ430
NoICE430
AC-Adapters:
JTE-9VP
Interface
Cables:
JTAG: IDC-14
JTAG:
FFC-10
JTAG:
FFC-8
Parallel Port: PPC-25L
Prototyping
Tools:
Solder Paste
Applicator:
SPA-3
|
|
|
M-28O-1232 Module (OEM, Assembled)
Part #: M-28O-1232
Price: $35.00
|
Description:
This is the reduced-cost, OEM version of EMBEDDEDkits
M-28P-1232 Module. It can be directly used
in end- products, or in applications where the Module's mode of
operation can be permanently selected by soldered-in wire jumpers
(supplied and installed by the user.)
EMBEDDEDkits M-28O-1232 Module comes with
a pre-installed, Texas Instruments MSP430F1232IDW ultra-low power Microcontroller. The MSP430F1232IDW has 8K of
Flash Memory, 256 bytes of
SRAM, 22 I/O lines, 16-bit Watchdog Timer, 16-bit Timer, USART, BOR, and an 8-channel, 10-bit ADC.
The module’s unique, operation-selection jumpers, connection options, and designed-in
features make it ideal for quick prototyping work, evaluation, or direct use in
end-products. Measuring only 2” x 7/8”, it can easily be connected to a Target
Board by direct wire attachment, or can be plugged-in a Target Board by using
single-row headers and mating sockets. Pads for headers
are spaced 0.7" apart.
A unique feature of
the M-28O Module, is the on-board circuitry to generate an Enable/Disable signal for controlling an
off-board 3-state buffer. This jumper-selected feature can be used to prevent
possible contention or unwanted interference between the MSP430 Microcontroller
shared JTAG lines and external I/O connections, during JTAG control/data exchanges.
Connection between the M-28O-1232, JTAG connector and EMBEDDEDkits JT-EASY is accomplished with
cable FFC-10, included with JT-E100A and
JT-E100K. EMBEDDEDkits MSP430 M-Series Modules can
also be connected to a JTAG Interface Tool like the Texas Instruments MSP-FET430 FET
or a compatible tool equipped with a 14-pin IDC-type connector, by using
SoftBaugh JFPC Adapter.
The M-28O-1232 Module does not include the Target Board connection
headers and mating sockets, the on-board headers for the operation selection
jumpers, and the shorting blocks.
** As a convenience to our customers, we
install the 10-pin FFC/FPC Connector.
|
|
Features and specifications:
- Small PC-Board, 2” x 7/8”
- MSP430F1232IDW, 28-pin SOIC Flash Microcontroller
- Pads for cylindrical or HC49/US or HC49/U type
Crystal
- On-board RC reset jumper
- Source of power-in, or Target
Board voltage sense-line output selection
- Enable/Disable line for off-board 3-state buffer
- 10-pin FFC/FPC JTAG interface connector
- Pads for direct connection to Target
Board, or to headers
- 0.7" o.c. connection headers pads spacing
|
What is included:
- Assembled and tested PC-Board
- 32.768Khz cylindrical Crystal (not
shown)
- ** 10-pin FFC/FPC Connector
(installed)
- User’s Guide (quick-start, printed version) with
schematic.
Download full version from website
|
